Namelist
Jump to navigation
Jump to search
Recommended ICON Namelist Settings
It is necessary for the user to choose the ICON settings carefully. Part of the values listed in are recommended to obtain a stable ICON-ART simulation with scientifically reasonable results. Another part is necessary to enable ART features like aerosol-cloud-interactions.
| Parameter | Value | Namelist | Description |
|---|---|---|---|
| dtime | - | run_nml | If facing stability problems, it is recommended to use a shorter time step as recommended by operational setups (e.g. 0.5*dtime). |
| inwp_gscp | 4 | nwp_phy_nml | Standard value is 1. Set this to 4 for aerosol-cloud-interactions within ICON-ART. Note, that you will still need to set iart_aci_warm and iart_aci_cold < 0 . |
| irad_aero | 6 | radiation_nml | aerosol optical properties are taken from climatology |
| 9 | optical properties depend on aerosol concentrations (set iart_ari = 1 in art_nml ) |
ART Namelists
ICON-ART has an own namelist to modify the setup of ART simulations at runtime. The main switch for ART, lart, is located inside run_nml. The namelist for the other ART switches is called art_nml.
A naming convention is used in order to show the type of data. An INTEGER namelist parameter starts with iart_, a REAL namelist parameter starts with rart_, a LOGICAL namelist parameter starts with lart_, and a CHARACTER namelist parameter starts with cart_.
The ICON-ART namelist is located in the module src/namelists/mo_art_nml.f90. General namelist parameters are listed and explained within . Namelist parameters for ART input are listed within . Namelist parameters related to atmospheric chemistry are listed within . Namelist parameters related to aerosol physics are listed within . Namelist parameters related to feedback processes between aerosols and meteorological variables are listed in . Finally, namelist parameters related to physics parameterizations in ICON are listed in.
| Name | function |
|---|---|
| General Variables | |
iart_init_aero
|
Initialization of aerosol species |
iart_init_gas
|
Initialization of gaseous species |
lart_diag_out
|
Enable output of diagnostic fields |
lart_pntSrc
|
Enables point sources |
lart_emiss_turbdiff
|
Switch if emissions should be included as surface flux condition |
cart_input_folder
|
Absolute Path to ART Input Files |
cart_io_suffix
|
user given suffix instead of automatically generated grid number |
| Atmospheric Chemistry | |
lart_chem
|
Main switch to enable chemistry |
lart_chemtracer
|
Switch for parametrised chemtracers |
lart_mecca
|
Switch for MECCA chemistry |
lart_psc
|
Switch for computation of PSCs |
cart_vortex_init_date
|
Date of vortex initialization |
cheminit_file(max_dom)
|
Path to chemical initialization file |
cart_cheminit_coord
|
Path to chemical initialization coordinate file |
cart_cheminit_type
|
Type of chemical initialization coordinate file |
| XML configuration | |
cart_chemtracer_xml
|
Path to XML file for parametrised chemtracers |
cart_mecca_xml
|
Path to XML file for MECCA tracers |
cart_aerosol_xml
|
Path to XML file for aerosol tracers |
cart_modes_xml
|
Path to XML file for modes |
cart_pntSrc_xml
|
Path to XML file for point sources |
cart_diagnostics_xml
|
Path to XML file for aerosol diagnostics |
cart_emiss_xml_file
|
Path to XML file for emission metadata |
cart_ext_data_xml
|
Path to XML file for metadata of datasets prescribing tracers |
cart_coag_xml
|
Path to XML file for coagulation processes |
| Atmospheric Aerosol | |
lart_aerosol
|
Main switch for the treatment of atmospheric aerosol |
iart_seasalt
|
Treatment of sea salt aerosol interaction with radiation |
iart_dust
|
Treatment of mineral dust aerosol interaction with radiation |
iart_anthro
|
Treatment of anthropogenic aerosol |
iart_fire
|
Enables treatment of wildfire aerosol |
iart_volcano
|
Enables treatment of volcanic ash aerosol |
iart_isorropia
|
Treatment of aerosol gas partitioning |
iart_nonsph
|
Treatment of nonspherical particles |
iart_pollen
|
Treatment of pollen |
iart_radioact
|
Treatment of radioactive particles |
cart_volcano_file
|
Absolute path + filename of input file for volcanoes |
cart_radioact_file
|
Absolute path + filename of input for radioactive emissions |
| Feedback Processes | |
iart_aci_warm
|
Nucleation of aerosol to cloud droplets |
iart_aci_cold
|
Nucleation of aerosol to cloud ice |
iart_ari
|
Direct interaction of aerosol with radiation |
| Name | Default Value | Description | Details | Dependencies | |
|---|---|---|---|---|---|
| General Variables | iart_init_aero | 0 | Initialization of aerosol species. |
0: Initialization with 0 1: At this point climatological aerosol profiles may be included as standard initialization 2: Initialization with fixed value different from 0.0_wp (e.g. using 10.0_wp) 5: Set aerosol tracer initial values from file 6: Read background climatology from aes-ham |
|
| iart_init_gas | 0 | Initialization of gaseous species. |
0: Nothing to do here, tracers are initialized with 0.0_wp automatically 1: At this point climatological gas profiles may be included as a standard initialization 4: Initializing chemical tracers using method given by .xml 5: Initializing from file |
||
| lart_diag_out | .FALSE. | Enable output of diagnostic fields. | If this switch is set to .TRUE., diagnostic output fields are available. Set it to .FALSE. when facing memory problems. | cart_diagnostics_xml | |
| lart_pntSrc | .FALSE. | Enables addition of point sources for passive tracer. | The sources are controled via cart_pntSrc_xml. | cart_pntSrc_xml | |
| lart_emiss_turbdiff | .FALSE. | Switch if emissions should be included to the turbulence scheme as surface flux condition | |||
| cart_input_folder | - | Absolute path where input folder of ART initialization and external files are located. | |||
| cart_io_suffix | 'grid-nr' | Specifies the grid specification in ART input file name convention. With default grid-number it is replaced by the four character string due to ICON parameter number_of_grid_used . Any other string can be included for each domain. | |||
| iart_modeshift | 1 | Doing mode shift (only temporary switch for debug) |
0 = off 1 = on |
||
| Atmospheric Chemistry | lart_chem | .FALSE. | Main switch to enable chemistry | lart_chemtracer = .TRUE. OR lart_mecca = .TRUE. | |
| lart_chemtracer | .FALSE. | Switch for chemical tracer processes | cart_chemtracer_xml | ||
| lart_mecca | .FALSE. | Enables the computation of full chemistry via the MECCA package. | cart_mecca_xml | ||
| lart_psc | .FALSE. | Switch if polar stratospheric clouds should be calculated | |||
| cart_vortex_init_date | - | Date of vortex initialization | |||
| cart_cheminit_file(max_dom) | - | Path to chemical initialization file | |||
| cart_cheminit_coord | - | Path to chemical initialization coordinate file | |||
| cart_cheminit_type | - | Type of chemical initialization coordinate file | |||
| XML configuration | cart_chemtracer_xml | - | Path to XML file for parametrised chemtracers | ||
| cart_mecca_xml | - | Path to XML file for MECCA chemistry tracers | |||
| cart_aerosol_xml | - | Path to XML file for aerosol tracers | |||
| cart_modes_xml | - | Path to XML file for modes | |||
| cart_pntSrc_xml | - | Path to XML file for point sources | |||
| cart_diagnostics_xml | - | Path to XML file for aerosol diagnostics (GRIB2 meta data) | |||
| cart_emiss_xml_file | - | Path and file name of the xml files for emission metadata | |||
| cart_ext_data_xml | - | Path to XML file for metadata of datasets prescribing tracers | |||
| cart_coag_xml | - | Path to XML file for coagulation processes | |||
| Atmospheric Aerosol | lart_aerosol | .FALSE. | Main switch for the treatment of atmospheric aerosol | cart_aerosol_xml | |
| iart_seasalt | 0 | Treatment of sea salt aerosol |
0: No treatment. 1: Initialization of seasalt emission. Add 6 to iart_ntracer. 2: A second parameterization is used for the seasalt emission. Add 6 to iart_ntracer. |
||
| iart_dust | 0 | Treatment of mineral dust aerosol |
0: No treatment. 1: Initialization of mineral dust aerosol (Vogel et al. 2006). 2: Simplified version of emission fluxes of mineral dust aerosol (Vogel et al. 2006). |
||
| iart_anthro | 0 | Treatment of anthropogenic aerosol |
0: No treatment. 1: With the anthropogenic aerosol. |
||
| iart_fire | 0 | Treatment of wildfire aerosol |
0: Nothing to do, no biomass burning emissions 1: Initialization of biomass burning tracer data |
||
| iart_volcano | 0 | Treatment of volcanic ash aerosol |
0: No treatment. 1: 1-moment treatment. Add 6 to iart ntracer. 2: 2-moment treatment. Add 6 to iart_ntracer. |
||
| iart_nonsph | 0 | Treatment of nonspherical particles |
0: USE Mie values 1: Ellipsoid mixture |
||
| iart_pollen | 0 | Treatment of pollen |
0: No treatment 1: Initialization of pollen tracer data |
||
| iart_radioact | 0 | Treatment of radioactive particles |
0: No treatment. 1: As described in the ICON-ART technical documentation. An input file has to be specified via cart_radioact_file. Add 9 to iart_ntracer. |
||
| Feedback Processes | iart_aci_warm | 0 | Nucleation of aerosol to cloud droplets |
0: Constant cloud droplet number inwp_gscp=4 1: Nucleation Warm ART |
|
| iart_aci_cold | 0 | Nucleation of aerosol to cloud ice |
0: Nucleation originial 2-moment scheme (1,2,3,4,5): Nucleation Cold ART 6: With tracking of activated dust 7: With prognostic dust as input and relaxation of activated dust |
||
| iart_ari | 0 | Direct interaction of aerosol with radiation |
0: No radiation feedback with ART aerosols 1: Turn on radiation feedback with ART aerosols (ASH or DUST). Set irad_aero = 9 in radiation_nml |
||
| Emissions | cart_volcano_file | - | Absolute path + filename of input file for volcanoes | ||
| cart_radioact_file | - | Absolute path + filename of input for radioactive emissions | |||
| Online emission module | See oem namelist |